Campbell Hausfeld PA212102 Manual De Instrucciones Y Lista De Repuestos

See Warranty on page 4 for important information about commercial use of this product.
Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
The Campbell Hausfeld general purpose
filter is designed to remove most liquid
and solid particles from the air supply.
Specifications
Average Air Flow . . . . 42.2 SCFM
(Based on 100 psi
inlet pressure with
5 psi drop)
Filter type . . . . . . . . . . . 5 Micron
Body material . . . . . . . Aluminum
Bowl material . . . . . . . Polycarbonate
Bowl size. . . . . . . . . . . . 100 ml
Max. Temperature . . . 125˚ F (52˚ C)
Max. Pressure . . . . . . . 150 psi
Air Inlet/outlet. . . . . . . 3/8 Inch NPT
Weight . . . . . . . . . . . . . 1.10 lbs
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service.
Safety Guidelines
This manual contains information that
is very important to know and under-
stand. This information is provided for
SAFETY and to
PREVENT EQUIPMENT PROBLEMS. To
help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2002 Campbell Hausfeld/Scott Fetzer
General Purpose Filter
Warning
indicates
a potentially hazardous situation
which, if not avoided, could result
in death or serious injury.
Caution indicates
a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Notice indicates
important
information, that if not followed,
may cause damage to equipment.
General Safety
Information
This product is a part of a high pressure
system and the following safety
precautions must be followed at all
times along with any other existing
safety rules.
Read this instruction manual
before installing this de vice
to the air supply system. Be
thoroughly fa mil iar with
the controls and the proper
use of the equip ment.
Safety
glasses
must be worn during
operation.
1. Always work in a well
ventilated area.
2. Do not exceed any pressure rating
of any component in the system.
3. Protect air lines from damage and/
or punctures.
4. Check air hoses for weak or worn
condition before each use. Make
sure all connections are secure.
5. Keep all nuts, bolts and screws tight
and ensure equip ment is in safe
working condition.
For parts, product & service information
visit www.chpower.com
Model PA212102
Figure 1
product is specifically
designed for com pressed
air service ONLY. Use
with any other material (liquid or
gas) is a misapplication and not
per mit ted. Use or injection of
certain hazardous liquids or gases
in the system (such as oxygen,
alcohol or liquid petroleum gas)
will harm the unit and result in a
combustible condition or
hazardous external leakage.
MANUAL
Misapplication will void all
warranties and manufacturer's
responsibilities.
Installation
Disconnect power and
release all pres sure from
the system before
at tempt ing to install, service,
relocate or per form any
maintenance.
1. Locate the air flow direction arrow
(See Figure 2, detail). This arrow
shows the direction of the air flow,
i.e., it points to the outlet.
2. Securely mount the filter in a
vertical position as close as pos si ble
to air tool connection.
3. Verify the arrow points to the
outlet. (See Figure 2.)
This
IN282500AV 11/02