Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 31)
(3-pin ADDR_LED2)
(see p.1, No. 5)
Virtual RAID On CPU
Header
(4-pin VROC1)
(see p.1, No. 33)
With the introduction of the Intel VROC product, there are three modes of operation:
SKU
HW key required
Pass-thru
Not needed
Standard
VROCSTANMOD
Premium
VROCPREMMOD
VROCISSDMOD
ISS
*Only Intel SSDs are supported.
*For further details on VROC, please refer to the official information released by Intel.
These two Addressable LED
1
headers are used to connect
GND
Addressable LED extension cable
DO_ADDR
VOUT
which allows users to choose
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 48 for
further instructions on this
header.
This connector supports Intel®
1
Virtual RAID on CPU and
GND
NVME/AHCI RAID on CPU
+3VSB
GND
PCIE.
VROC RAID KEY
Key features
• Pass-thru only (no RAID)
• LED Management
• Hot Plug Support
• RAID 0 support for Intel Fultondale NVMe SSDs
• Pass-thru SKU features
• RAID 0, 1, 10
• Standard SKU features
• RAID 5
• RAID 5 Write Hole Closure
X299 Creator
33