ASROCK X299 Creator Manual De Instrucciones página 49

X299 Creator
Step 3
1
Before installing a M.2 (NGFF) SSD
2
module, please loosen the screws to
1
remove the M.2 heatsink.
*Please remove the protective films on
the bottom side of the M.2 heatsink
before you install a M.2 SSD module.
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
Step 5
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
E D
NUT2 NUT1
this might damage the module.
45