AL-KO solo T22-110.0 HDH-A V2 Manual De Instrucciones página 48

GB
Display Fault
Err 07 Mower mecha-
nism contact
switch
Err 08 Start relay
Err 09 Solenoid valve
Err 10 Ignition coil
Err 11 Internal supply
voltage
Err 12 Internal supply
voltage monitor-
ing
* : * The display goes out for about 4 seconds.
**: Delete the error by pressing the R key (03/13).
48
Fault description
ECU detects incorrect sta-
tus of the mower mecha-
nism output.
ECU detects incorrect sta-
tus of the start relay output.
ECU detects incorrect sta-
tus of the engine solenoid
valve output.
ECU detects incorrect sta-
tus of the ignition coil out-
put.
ECU detects incorrect sta-
tus of the internal supply
voltage output.
ECU detects incorrect sta-
tus of the internal supply
voltage monitoring.
Help in case of malfunction
Fault rectification
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
493516_a