Mopar 82210888 Serie Instrucciones De Instalación página 8

n. Secure the Violet/White wire to the factory harness using
supplied wire tie.
o. Resecure the "I" connector into the TIPM.
3. Resecure the TIPM
a. Resecure the TIPM on the TIPM mounting
bracket by re-engaging the (3) locking tabs.
WCM Replacement
** Orginal WCM must be removed and the new WCM must be installed **
1. Refer to the vehicle Service Manual section 8 Electrical/
Starting/Remote Start Antenna Module/ Installation - for
WCM replacement.
Wire Tie
8 of 11
Locking Tabs