Tannoy QFLEX 16LS-WP Guia De Inicio Rapido página 10

18
QFLEX 16LS-WP
Assembly
Place each module in its respective position on the assembly area keeping them slightly spaced apart. All electronic components are housed in the master module of a
QFlex 16LS. Connect the multipin connectors as shown.
Align the two columns together as shown below.
Having the hinge points on either side of the QFlex column allow the loudspeaker to be rotated at 90 degrees to the mounting structure allowing easy access to
the input connector panel.
The installer must ensure that the mounting surface is capable of safely and securely supporting the loudspeaker. Seek help from architects, structural engineers or
other specialists if in any doubt.
Attach the joining plates in the three stages as shown. Only one wall
bracket is required to mount the two modules. For flexibility the wall
bracket can be mounted to either the top or the bottom column. The wall
bracket can be hinged on the left or right pivot points. 3mm Allen grub
screws allow the QFlex to be locked at the desired horizontal angle.
Mounting
QFLEX 16LS-WP
For mounting instructions and schematics, please refer directly to QFlex Operations Manual - available at Tannoypro.com.
209.0 [8.2]
2525.2 [99.4]
64.6 [2.5]
179.5 [7.1]
214.6 [8.4]
Quick Start Guide
1165.5 [45.9]
958.0 [37.7]
750.5 [29.5]
19