Assembly Instructions - allen+roth GAD17102L Manual Del Propietário

6

Assembly Instructions

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1-866-439-9800 toll-free . Please have
your owner's manual and model number available for
reference .
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that's free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual) .
• (1) Precision-filled LP gas grill tank with Acme Type 1 external
threaded valve connection (standard grill size) (not included) .
Typical assembly is approximately 20 minutes .
W CAUTION: Two (2) people will be required for assembly.
W WARNING: Failure to position the parts in accordance with
these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage
or personal injury.
3
Attach Side Panels and Rear Panel
Note: Attach bottom screws before attaching top screws . Do not fully tighten srews
until step 4 .
A
x 12
®
Gas Fire Pit
Model No. GAD17102L
2
Attach Legs
W CAUTION: Two (2) people will be required to turn the outdoor
fire pit over.
W CAUTION: To avoid scratches choose a smooth surface that's
free of cracks or openings.
Note: Do not fully tighten srews until step 4.
A
x 8
4
Attach Gas Tank Prevent Bar to Base, then Attach Base
Note: Tighten screws from steps 2 and 4 .
A
A
x 4
B
B
x 4