Assembly Instructions - allen+roth Dualheat GAD19104L Manual Del Propietário

Need help? 1-866-439-9800, 8 a.m - 8 p.m., EST, Monday - Sunday.
6

Assembly Instructions

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1-866-439-9800 toll-free . Please have your
owner's manual and model number available for reference .
Note: The model number is printed on a label which can be found on the inside door,
back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To protect components,
choose a smooth surface that's free of cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before completing each
step, go back and fully tighten all hardware . Be careful not to over-tighten .
That could damage surfaces or strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the solution are
included in the "Operating Instructions" section of this manual) .
• (1) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve
connection (standard grill size) (not included) .
Typical assembly is approximately one hour .
W CAUTION: Two (2) people will be required for assembly.
W WARNING: Failure to position the parts in accordance with
these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage
or personal injury.
3
Attach Legs
W CAUTION: TWO (2) PEOPLE WILL BE REQUIRED TO TURN THE
OUTDOOR FIRE PIT OVER.
W CAUTION: TO AVOID SCRATCHES CHOOSE A SMOOTH SURFACE
THAT'S FREE OF CRACKS OR OPENINGS.
Note: Do not fully tighten screws until step 5 .
11
12
A
x 8
Do not return to place of purchase
A
11
13
2
Turn Outdoor Fire Pit Over
W CAUTION: Two (2) people will be required to turn the outdoor
fire pit over.
W CAUTION: To avoid scratches choose a smooth surface that's
free of cracks or openings.
4
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws . Do not fully tighten screws
until step 5 .
A
A
x 12