Sanus BLT3 Manual De Instrucciones página 4

STEP 1 ATTACH TV BRACKET TO TV
Parts and Hardware for STEP 1
WARNING:
This product contains small items that could be a choking hazard if swallowed.
and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
TV Screws
01
[Only one size fits your TV]
(qty. 4 each)
M6
M6 x 12mm
M6 x 35mm
M8
M8 x 16mm
M8 x 30mm
M8 x 50mm
1.1 Select TV
Screw Diameter
Only one screw size fits your TV.
M6
01
NOTE:
If your TV
included inset spacers or
adapters, use them UNDER
the mount hardware.
4
M6 x 20mm
M8 x 20mm
M8 x 40mm
1.2 Select TV Screw Length / Spacers
A
NO SPACER
• Flat Back TV
[TV brackets
M8
lay flat on your TV]
Use short TV screws
Spacers
03
CAUTION:
with your screw
combination AND TV bracket
—
Too short will not hold your TV.
—
Too long will damage your TV.
Washers
(qty. 4)
02
M6/M8
B
01
Use long TV screws
.
not needed.
create extra space between the TV and TV bracket.
Verify adequate thread engagement
, washer , spacer
01 02
/
04 05
.
Before starting assembly, verify all parts are included
Spacers
[If necessary]
(qty. 4 each)
03
M6/M8
2.5mm
Left
TV Bracket
04
5mm
CAUTION:
personal injury or property damage!
*
The TV brackets contain potential
pinch points during operation.
Keep fingers away from
pinch points when
22mm
retracting the TV. (arrows)
SPACER NEEDED
• Flat Back TV
with
Extra Space Needed
[for deep inset holes
or cable interference]
and spacers
01
Inset Holes Cables
03
Too Short Too Long
TV Bracket
*
*
Right
TV Bracket
05
(qty. 1) (qty. 1)
Avoid potential
• Rounded or
Irregular Back TV
[TV brackets NOT
resting flat on your TV]
to
03
Rounded Back
01
02
01
02
04
04
05
05
03
Correct