Sanus BLT3 Manual De Instrucciones página 7

STEP 2B
CAUTION:
Avoid potential personal injury or property damage!
●
Mount the wall plate
07
●
Minimum solid concrete thickness: 8 in. (20.3 cm)
●
Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
●
Minimum horizontal space between fasteners: 16 in. (40.6 cm)
●
For concrete applications, TV brackets
centered in wall plate
07
the wall plate location
2
DRILL
4X
06
CAUTION:
CAUTION:
Never drill into the mortar between blocks. Never drill into the mortar between blocks.
3 4
INSERT ANCHORS
09
4X
CAUTION:
Be sure the anchors are seated flush
09
with the concrete surface.
Solid Concrete or Concrete Block Installation
directly onto the concrete surface
/ must remain
04 05
. Keep this in mind when selecting
3 in. (7.6 cm)
3/8 in.
(10 mm)
5
SECURELY TIGHTEN
Open
covers
CAUTION:
Do not over-tighten the lag bolts
against the wall plate
1
POSITION TEMPLATE
4X
To calculate your precise wall plate location, check out
TIP:
TIP:
our HeightFinder at sanus.com [www.sanus.com/1172].
3
REMOVE TEMPLATE
06
4X
Avoid potential personal injury or property damage!
. Tighten the lag bolts only until they are pulled firmly
08
.
07
Min. 16 in. (40.6 cm)
07
Close
bottom
08
cover
Skip to STEP 3 on PAGE 9.
Visit
HeightFinder™
sanus.com
/1172
06
7