Philips AVENT SCF355/07 Manual De Instrucciones página 4

6aaaEnglish
Explanation of settings
The bottle warmer is switched off and the light is off. On every other
setting, the appliance is switched on and the light is lit.
Select this setting when you want to quickly warm a bottle of milk at room
temperature (22 °C/72 °F) with a content from 60ml/2oz to 330ml/11oz
or at cold temperature (5 °C/40 °F) with a content from 60ml/2oz to
240ml/8oz. The bottle has to be taken out immediately after warming to
the right temperature, otherwise the milk will be overheated.
Select this setting when you want to quickly warm a bottle of milk
at cold temperature (5 °C/40 °F) with a content from 270ml/9oz to
330ml/11oz. The bottle has to be taken out immediately after warming
to the right temperature, otherwise the milk will be overheated.
Select this setting when you want to warm a container/jar of baby food.
This setting warms milk at a slower speed and then keeps it warm.
Defrost a bottle/container of milk/baby food to liquid state. No
Warming occurs.
Using the bottle warmer with express milk warming setting
1 Put the mains plug in the wall socket.
Place a bottle in the bottle warmer.
2 Fill the bottle warmer with drinking
water up to the level of the milk in
the bottle. In case of large amounts
of milk, the maximum level of water is
approximately 1 cm below the top of the
bottle warmer. An accurate water level
ensures correct warming performance.
3 Select the desired setting based on the milk volume.
See the express warming reference table at the end of
this chapter to check how long the milk needs to be
warmed in the selected setting.
Note
• The speed of warming milk depending on the amount of the milk warmed and on
its initial temperature, i.e. room temperature (22 °C) or fridge temperature (5 °C).
4 The orange light goes on when you select a setting.
This indicates that the bottle warmer is on.
Note
• Whilst warming the milk circulates and heats evenly.
5 Check the express warming
reference table for the time required
to warm the milk. After the time
indicated in the express warming
reference table has passed, remove
the bottle for feeding or turn the
knob to "Keep Warm" to keep milk
warm at a right temperature.
Tip
• When you find the milk is not warm enough, you can place the bottle back into
the appliance for a maximum of 30 seconds of extra warming. This will create a
slightly warmer result but without overheating.
Englishaaa7