Philips AVENT SCF355/07 Manual De Instrucciones página 6

10aaaEnglish
Using the keep warm setting to warm milk
1 Put the mains plug in the wall
socket. Place the bottle or
container in the bottle warmer.
2 Fill the bottle warmer with
drinking water up to the level of
the milk in the bottle/container.
In case of large amounts of milk,
the maximum level of water is
approximately 1 cm below the top
of the bottle warmer.
3 Select the position of keep warm.
At this setting, you can warm your milk at a slow pace and keep it warm at the right
end temperature. E.g. to warm a bottle of 125ml/4.2oz milk starting from room
temperature, it will take 15-20 minutes. The warming time may be longer or shorter
depending on the milk volumes and starting temperature.
Note
• Philips Avent recommends you feed your baby as soon as possible after the milk is
warmed. We advise not to reheat the milk after it has cooled down again.
• Always check the temperature before you feed your baby.
4 Turn the knob back to the 'off' position when the bottle/
container is removed from the bottle warmer.
Using the bottle warmer with defrost setting
1 Put the appliance plug in the
wall outlet. Place the bottle or
container in the bottle warmer.
2 Fill the bottle warmer with drinking
water up to the level of the milk/
baby food in the bottle/container.
In case of large amounts of milk/
baby food, the maximum level of
water is approximately 1 cm below
the top of the bottle warmer.
Englishaaa11