Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.4.6. Configuring the countdown timer
The duration of the countdown can be configured to the nearest minute, between 1 and 10
minutes.
menu
Press
for 2 seconds, then on
is displayed, then adjust the required value using the
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.7. Simulation mode
Simulation mode can be accessed via the Configuration menu. This mode is shown by the icon
flashing on the LCD and remains active after power has been cut off. It may be used
for sales demonstrations of the product and features the following functions:
Displays a coherent bottom profile (in distance and variation),
Displays a coherent boat speed (in absolute value and in acceleration),
Displays a speed over ground related to the simulated boat speed,
Displays a coherent water temperature,
Displays the real supply voltage,
Transmits simulated data via the NMEA output.
Transmits simulated data via the communication bus.
menu
Press
for 2 seconds, then
displayed, then activate (on) or deactivate (OFF) simulation using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
2.4.8. Key beeps
The key beeps can be activated or deactivated.
menu
Press
for 2 seconds, then
displayed, then activate (on) or deactivate (OFF) the beep using the
and
keys.
Press
to exit setup mode, or time out after 10 seconds.
menu
until the "tIME" setup page
menu
until the "SIMUL" page is
menu
until the "bIP" page is
Installation and Operation Manual S400 series
and
15
Publicidad
Capítulos
Tabla de contenido
