Connecting To A Boiler With A Jv-Pc Interface - Vaillant vrnetDIALOG 820f Manual De Instrucciones

5 Electrical installation
5.2 Connecting to a boiler with a JV-PC
interface
Note
You can only use the eBUS diagnostic
plug if the vrnetDIALOG is connected
to an eBUS appliance.
Note
To connect the boiler use the grey
lead with the RJ12 plug (6-pin).
12
Fig. 5.3 Connecting to a boiler with a JV-PC inter-
face
• Plug the RJ12 connector of the connection
cable into the X6 socket on the boiler.
Installation Manual for vrnetDIALOG 820f