Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
b) Setting the timer to turn one or more cooking zones off
Touching the heating zone key (4) that you want to set the
timer for.
Touch timer key (6), the "10" will show in the timer
display and the "0" flashes.
Set the time by touching MINUS key (2) or PLUS key (3).
Touch timer key again, then number to represent tens digit
will flash. Set the desired dozens of minutes by touching
MINUS key (2) or PLUS key (3).
When the time is set, it will begin to count down
immediately. The display will show the remaining time.
NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone will be switched off
automatically.
Other cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the
steps of setting one zone;
When you set the time for several cooking zones
simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows
the min. timer. The dot of the corresponding zone
flashes.
Once the countdown timer expires, the corresponding zone will switch off. Then it will show
the new min. timer and the dot of corresponding zone will flash.
Touch the heating zone selection control, the corresponding timer will be shown in the
timer indicator.
c) Cancel the timer
Touching the heating zone selection control (4) that you
want to cancel the timer.
Touching the timer control (6), the indicator flash.
Set one zone
set more zones:
Publicidad
Tabla de contenido
