Svan SVV6374 Manual De Instrucciones página 46

Under any circumstances, make sure the hob is well ventilated and the air inlet and
outlet are not blocked. Ensure the hob is in good work state. As shown below:
Note: The safety distance between the hotplate and the cupboard above the hotplate
should be at least 760 mm.
A(mm) B(mm)
760 50 min.
WARNING: Ensuring Adequate Ventilation
Make sure the induction hob is well ventilated and that air inlet and outlet are not
blocked. In order to avoid accidental touch with the overheating bottom of the hob, or
getting unexpectable electric shock during working, it is necessary to put a wooden
insert, fixed by screws, at a minimum distance of 50mm from the bottom of the hob.
Follow the requirements below.
⚫ There are ventilation holes around outside of the hob. YOU MUST ensure these
holes are not blocked by the worktop when you put the hob into position.
Be aware that the glue that join the plastic or wooden material to the furniture, has
⚫
to resist to temperature not below 150℃, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to
⚫
withstand a temperature of 90℃.
C(mm) D
20 min. Air intake
E
Air exit 5mm