Panasonic TY-WK65PV7 Instrucciones De Instalación página 5

Installation procedure
3. Prepare the Plasma Display.
Attach the insulating spacers to the display.
N o t e
Caution
• Place the display face down on top of a cloth which is clean and free from other foreign particles, and then carry
out the procedure above.
4. Install the display to the wall-hanging bracket.
Notches
(For vertical installation)
Note
• Do not lift the display too high, otherwise it may become unhooked.
10
1. Use the accessory tool (Allen key) to install
2. Install the covers.
Cover
Notches
(For horizontal installation)
Lower
(For vertical
installation)
Lower
(For horizontal
installation)
Insulating spacer
the four accessory pan head bolts with hex
socket, toothed pan washers and insulating
spacers into the holes as shown in the
illustration.
Pan head bolt wih hex socket
Toothed pan washer
Insulating spacer
Allen key
• Install the two covers over the holes on the
under side of the Plasma Display.
Installation procedure
Push the upper insulating spacers on
the display into the notches at the top
of the wall-hanging bracket until they
are hooked in, and then lower the
display into place.
While lifting the display slightly, insert
the lower insulating spacers on the
display into the lower horizontal
hanging holes in the wall-hanging
bracket, and then lower the display.
N o t e
Caution
• Fit the plasma TV to the wall-hanging bracket
after making wiring connections with other
components. Should additional wiring
connections be required later, remove the
plasma TV from the wall-hanging bracket
before making those connections.