Smart Wifi Remote Control (Optional); Testing Your Fan; Important - Craftmade Mesmerize Guia De Instalacion

13. Smart WiFi Remote Control (Optional).

To enjoy all the potential of your new
device, you will need to download the
Craftmade Smart app, available on the Google
Play Store and Apple App Store, or use the QR
code to download the app.
Once you download the app, register new
account and password.
NOTE: Please keep this account information.
You will use this account when you connect with
your smart speaker.
When you log into the main page you will see
+
the ' ' on the right side of the top space. You
will see the add a new device screen, then
choose fan. Follow the configuration Wi-Fi
process to continue pairings.
After the paring process with Wi-Fi receiver, you
can control the fan speed and light functions on
the app. If you cannot find the fan, please see
"Help" section on the add a new device screen.

14. Testing Your Fan.

It is recommended that you test fan before finalizing installation.
Restore power from circuit box and wall switch (if applicable). Test fan
speeds with the different fan speed buttons (I - VI) on remote control.
Test the light ON/OFF function by pressing the
dimmer function by pressing the
up to 5 seconds. If the remote control operates all of the functions of
the fan, battery has been installed correctly. If the remote control do
(does) not operate all of the fan functions, refer to "Troubleshooting"
section to solve any issues before contacting Customer Service.
Fan must be on LOW before setting the fan in reverse. Use
to recirculate air depending on the season. A ceiling fan will allow you
to raise your thermostat setting in summer and lower your thermostat
setting in winter without feeling a difference in your comfort.
NOTE: If the remote control interferes with other appliances, activate a
new code on the remote control by turning the power off first. Go back
to the instructions for the SET button in Section 11 (page 10).
IMPORTANT: Remote control must be synchronized with fan in order to
properly function.
button; test the
button and holding it down for
page 12
button
or
I I I
IV
V
I I
VI
I