Kohler K-14435 Manual Del Usuario página 4

Multiple-Post Installations
Mark centerpoints.
1. Position the Wall Plate(s)
For Multiple-Post Accessories
Using a level and tape measure, mark the centerpoints of your
multiple-post accessory. Refer to the "Roughing-In" section of this
guide to assist you.
Orient the wall plate with the small round mounting hole in the
12 o'clock position, as shown.
Align the center of each wall plate at the marked centerpoints.
For Single-Post Accessories
Orient the wall plate with the small round mounting hole in the
12 o'clock position, as shown.
For All Accessories
Mark the mounting hole locations with a pencil. Set the wall
plate(s) aside.
Using the correct type of drill bit for your wall material, carefully
drill pilot holes at the marked mounting hole locations. Refer to
the "Before You Begin" section for proper drill bit diameters.
1020118-2-G
All Installations
Verify level.
4
Orient
wall plate.
Mark
mounting
holes.
Kohler Co.