HAMPTON BAY PORTSMOUTH 51355 Guía De Uso Y Mantenimiento página 10

Assembly - Hanging the Fan (continued)
7
Mounting the fan (standard)
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
□
Align the locking slots of the ceiling canopy (C) with the two
screws (SS) in the mounting bracket (A). Push up to engage
the slots, and turn clockwise to lock the canopy (C) in place.
□
Firmly tighten the two mounting screws (SS).
□
Install the remaining two mounting screws (SS) into the holes
in the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (K) by aligning the ring's
slots with the screws in the canopy (C). Rotate the canopy
ring (K) counterclockwise to lock it in place.
SS
A
K
C
D
10
Mounting the fan (close-to-ceiling)
WARNING: The locking slots of the ceiling canopy are provided
only as an aid to mounting. Do not leave the fan assembly
unattended until all four canopy screws are engaged and firmly
tightened.
□
Carefully unhook the fan motor assembly (D) from the
mounting bracket (A) and align the locking slots of the ceiling
canopy (C) with the two screws (SS) in the mounting bracket
(A). Push up to engage the slots and turn clockwise to lock
the canopy (C) in place. Immediately tighten the two mounting
screws (SS) firmly.
□
Install the remaining two mounting screws (SS) into the holes
in the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (K) by aligning the ring's
slots with the screws in the canopy (C). Rotate the canopy
ring (K) counterclockwise to lock it in place.
SS
A
K
C
D