4. the number of felt washers (C) used.
Observe the information given by the manufacturer of the medium.
■
In practice, sprayed liquids are a mixture of various substances whose composition
is only known to the manufacturer. The suitability of the unit for a specific liquid must
therefore be determined before use by the user in conjunction with the manufacturer of
the substance.
Foreseeable misuse
■
The device is not suitable for:
■
formic and hydrofluoric acid in anyconcentration.
■
acids and alkalis at concentra tions greater than the amounts quoted or as mixtures.
■
oils and fuels.
■
Media which may cause or promote cracks and fissures in the plastics used.
■
liquids at temperatures over + 40°C.
■
inflammable liquids.
■
very tenacious or sticky liquids, or liquids that leave residues, which cannot be
completely poured or flushed out of the unit (oils and oil-bearing liquids).
■
On request, the manufacturer of the unit can make available a detailed list of the
materials used in the parts of the unit for more detailed examination.
■
Unauthorised changes to the unit made by the user or inappropriate use shall render
null and void the liability of the manufacturer for any damage caused as a result.
Getting Started
WARNING!
Health risk through leaking cleaning fluid!!
A leaking device or leaking components may result in draining or spouting of cleaning fluid.
For this reason, observe the following safety instructions:
■
Check that the unit is in perfect condition and properly sealed each time before use.
Pull up the safety / pressure relief valve (A) by hand and check that it returns to the
starting position.
■
Only operate or move device when standing upright.
■
Inspect all screw joints for tight fitting.
■
Unscrew the valve body (B) by rotating to the left out of the container for filling.
■
Fill the tank, see "Max. filling volume" in the Technical data section and the tank scale
for details on the maximum amount that can be put in.
WARNING!
Contact with cleaning fluids poses a health risk.