Wood Stud Installation - Sanus BLL2 Manual De Instrucciones

STEP 2A
CAUTION:
Avoid potential
personal injury or property damage!
● Drywall covering the wall
must not exceed 5/8 in. (1.5 cm)
● Minimum wood stud size:
nominal 2 x 4 in. (5.1 x 10.2 cm)
actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
● Minimum horizontal space
between fasteners:16 in. (40.6 cm)
● Stud centers must be verified
4
POSITION TEMPLATE
4X
05
To calculate your precise wall plate location, check out
TIP:
our HeightFinder at sanus.com [www.sanus.com/1172].
6
REMOVE TEMPLATE
05

Wood Stud Installation

Max. 5/8 in. (1.5 cm)
1
LOCATE
Visit
HeightFinder™
sanus.com
/1172
Min. 1 ½ in. (3.8 cm)
Min. 16 in. (40.6 cm)
2
VERIFY
5
DRILL
4X
05
Be sure you drill into the CENTER of the stud.
CAUTION:
7
SECURELY TIGHTEN
06
07
4X
CAUTION:
Avoid potential personal injury or property damage!
All four lag bolts MUST BE firmly tightened to prevent
07
unwanted movement of the wall plate
securely fastened to the wall before continuing on to the next step.
Min. 3 ½ in. (8.9 cm)
3
MARK
2 ¾ in. (7.0 cm)
1/8 in.
(3 mm)
. Ensure the wall plate is
06
Skip to STEP 3 on PAGE 10.
7