Sanus BLL2 Manual De Instrucciones página 8

STEP 2B
CAUTION:
Avoid potential personal injury or property damage!
●
Mount the wall plate
●
Minimum solid concrete thickness: 8 in. (20.3 cm)
●
Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)
●
Minimum horizontal space between fasteners: 16 in. (40.6 cm)
2
DRILL
4X
05
CAUTION:
CAUTION:
Never drill into the mortar between blocks. Never drill into the mortar between blocks.
3 4
INSERT ANCHORS
4X
Be sure the anchors
CAUTION:
CAUTION:
with the concrete surface.
8
Solid Concrete or Concrete Block Installation
directly onto the concrete surface
06
3 in. (7.6 cm)
3/8 in.
(10 mm)
08
are seated flush
08
1
POSITION TEMPLATE
4X
Min. 16 in. (40.6 cm)
To calculate your precise wall plate location, check out
TIP:
TIP:
our HeightFinder at sanus.com [www.sanus.com/1172].
3
REMOVE TEMPLATE
05
5
SECURELY TIGHTEN
06
07
4X
CAUTION:
Avoid potential personal injury or property damage!
All four lag bolts MUST BE firmly tightened to prevent
07
unwanted movement of the wall plate
securely fastened to the wall before continuing on to the next step.
Visit
HeightFinder™
sanus.com
/1172
05
. Ensure the wall plate is
06
Skip to STEP 3 on PAGE 10.