Kit Assembly - Metra 95-7356B Instrucciones De Instalación

ISO DDIN radio provision
1. Reconnect the factory panel clips to the
radio housing. (Figure A)
2. Reattach the factory hazard button
to the radio trim panel with the (2)
#8 x 3/8" screws provided. (Figure A)
3. Slide the radio into the radio brackets
and secure with the screws supplied
with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS.
5. Reconnect the negative battery terminal
and test the radio for proper operation.
6. Snap the radio trim panel and reassemble
the dash in reverse order of disassembly
to complete the installation.

KIT ASSEMBLY

(Figure A) (Figure B)
3
REV. 7/7/21 INST95-7365B