Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
POWER SWITCH AND CONNECTIONS
After checking the power supply, the system can be
switched on. The main switch is on position "I."
SELECTING INITIAL FILM TYPE
There are three different film types available for
selection when turning on the machine.
Air Pillows
ULINE S-22467
2
AIRmove
Air Pillows
ULINE
DESCRIPTION
PART NO.
Air Pillows
S-22467
Air Cushion
S-22468
Bubble Film
S-22469
PAGE 5 OF 27
SETTING UP THE DEVICE CONTINUED
Select air pillows, bubble or
cushion film options by pressing
six times until film type shows
up.
Press
or
to change the
film type.
CUSHION SIZE
SPACING GUIDE
8 x 4"
11/16"
1⁄ x 9 x 13"
3/4 x 6 x 13"
START FILM PRODUCTION
Once a menu is selected with its pre-set parameters the
machine is ready to operate. Every menu follows the
same steps:
Air Pillows
ULINE S-22467
Air Pillows
ULINE S-22467
180
Air Pillows
ULINE S-22467
1/2"
HOW TO ADJUST AIR SETTINGS
1/2"
The chosen film type menus automatically run on the
correct air and temperature settings. You do not need
to adjust machine setting manually, but if the automatic
settings are not optimal, the keypad allows you to
change the following settings:
Air Pillows
ULINE S-22467
Machine is ready to start
Air Pillows film production.
AIRmove
2
Press
to start
Air Pillows film production.
AIRmove
2
Press
again to stop
Air Pillows production.
AIRmove
2
Display Air Pillows
Ready to start
Press 1 x
2
AIRmove
for air settings.
0621 IH-7241
Publicidad
Tabla de contenido
