Remote Control - Bosch GML 50 Professional Manual Original

OBJ_BUCH-1267-002.book Page 19 Thursday, December 20, 2012 2:39 PM
A total of 20 FM and 10 AM stations can be preset. Please
note that an already occupied preset is overwritten when a
new radio station is assigned to it.
For playback of a preset station, briefly press the "– Seek"
button 35 to scan down or the "Seek +" button 33 to scan up,
until the desired preset is displayed in indicator d and "PRE-
SET" is displayed in e.
Connecting External Audio Sources (see figure C)
Apart from the integrated radio, various external audio sourc-
es can be played.
AUX-In connection 1: The AUX-In connection 1 is particularly
suitable for audio sources to be placed outside of the digital
media bay (e.g. a CD player). Remove the protective cap of
the "AUX 1 IN" socket 40 and insert the 3.5 mm plug of the
provided or of another matching AUX cable into the socket.
Connect the AUX cable to an appropriate audio source.
After removing the AUX cable, reattach the protective cap of
the "AUX 1 IN" socket 40 to protect against dirt/debris.
For external audio sources via the following connections,
open locking latch 19 and open lid 20 of the "Digital Media
Bay".
– SD/MMC connection: Insert a SD or MMC card into the
SD/MMC slot 46. The labelling of the card must face to-
ward the fuse cap 43. Playback of the card can be started
as soon as the track number as well as the number of avail-
able tracks on the card are displayed in indicator d. To re-
move the card, briefly press on the card, which is then
ejected.
– USB connection: Insert a USB stick (or the USB plug of an
appropriate audio source) into USB port 45. Playback of
the USB stick can be started as soon as the track number
as well as the number of available tracks on the stick are
displayed in indicator d. To remove the USB stick, pull it
out of the USB port.
– AUX-In connection 2: AUX-In connection 2 is particularly
suitable for audio sources that can be placed inside of the
digital media bay (e.g. a MP3 player). Insert the 3.5 mm
plug of the provided AUX cable into the "AUX 2 IN" socket
47. Connect the AUX cable to an appropriate audio source.
When small enough, the connected external audio source can
be fastened into the digital media bay using the Velcro strap of
the holder 48.
After connecting the external audio source, close the Me-
dia/connections flap 20 if possible, to protect against dam-
age and debris.
For playback of the connected audio source, press the
"Source" button 34 until the indicator n for the desired audio
source appears on the display.
Controlling External Audio Sources
For audio sources connected via the SD/MMC slot 46 or the
USB port 45, playback can be controlled via the radio charg-
er. The number of the selected track is displayed at the left of
indicator d and the number of available tracks on the right.
Play/Pause:
– To start playback, press the play/pause button 36. The
playing time of the current track is displayed in indicator j.
Bosch Power Tools
– To interrupt or continue the playback, press the
play/pause button 36 again. The current playing time
flashes in indicator j.
Selecting Tracks:
– To select a track, press the "– Seek" button 35 to scan
down or the "Seek +" button 33 to scan up, until the num-
ber of the desired track is displayed on indicator d.
– To start playback, press the play/pause button 36.
Random Playback/Repeat:
– For random playback of all tracks on the card or the USB
stick, press the random playback/repeat button 32 once.
The indicator f appears on the display.
– To repeat all tracks in the current folder/directory, press
the random playback/repeat button 32 a second time. The
indicator g appears on the display.
Note: Only in this function, the number of the current fold-
er/directory on the card or USB stick will appear on the
right-hand side of indicator d. To change the folder/direc-
tory, you have to return to the normal playback first and se-
lect a track from the desired folder/directory.
– To repeat only the current track, press the random play-
back/repeat button 32 a third time. The indicator h ap-
pears on the display.
– To return to normal playback mode, press the random
playback/repeat button 32 a fourth time, so that none of
the indicators f, g or h appear on the display.
– To start playback, press the play/pause button 36.
Connecting External Audio Playback (see figure C)
The current audio signal of the radio charger can also be trans-
ferred to other playback devices (e.g. amplifier and speakers).
Remove the protective cap of the "LINE OUT" socket 42 and
insert the 3.5 mm plug of a matching AUX cable into the sock-
et. Connect an appropriate playback device to the AUX cable.
After removing the AUX cable, reattach the protective cap of
the "LINE OUT" socket 42 to protect against dirt/debris.

Remote control

 Have the remote control repaired only through a quali-
fied repair person and only using identical replacement
parts. This will ensure that the functionality of the remote
control is maintained.
 Do not operate the remote control in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the remote con-
trol which may ignite the dust or fumes.
Initial Operation
 Protect the remote control against moisture and direct
sunlight.
 Do not subject the remote control to extreme tempera-
tures or variations in temperature. As an example, do
not leave it in vehicles for longer periods. In case of large
variations in temperature, allow the remote control to ad-
just to the ambient temperature before putting it into oper-
ation.
The remote control remains ready for operation as long as
battery with sufficient voltage is inserted.
English | 19
1 609 92A 01V | (20.12.12)