Kohler K-11344 Guia Del Usuario página 2

No change in measurements if connected
with drain illustrated. (K-7219)
36" (91.4 cm)
24-1/8"
21-5/8"
(61.3 cm)
(54.9 cm)
Product Information
Applicable product:
Freestanding bath with hole drilling for
floor-mount bath filler
Required accessory:
Bath drain
Recommended spouts and spout locations*:
Area A – floor-mount
installation
*Refer to shaded areas in product diagram for recommended
installation area locations.
Fixture*:
Bathing well
Basin area 46-3/4" (118.7 cm) x 21-5/8" (54.9 cm)
Top area 69-15/16" (177.6 cm) x 34-3/8" (87.3 cm)
To overflow
Water depth 16-1/2" (41.9 cm)
Capacity 71 gal (268.8 L)
Weight 100 lbs (45.4 kg)
* Approximate measurements for comparison only.
Included component:
Cut-out template
1055344-1-E
A
72" (182.9 cm)
K-11344
K-7219
K-18486 and K-18492
1055345-7
Notes
Install this product according to the installation guide.
Floor support under bath must provide for minimum of 43
lbs/square foot (209.9 kg/square meter) loading.
No change in measurements is required if the unit is connected
with the K-7219 drain illustrated.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
Fixture dimensions are nominal and conform to tolerances in ANSI
Standard Z124.1.2.
2
Bottom View
36" (91.4 cm)
Kohler Co.