Step 2: Attach Ex-Arm-Rest Stems To The Tiller; Step 3: Attach Handle Bar To The Tiller - MADER HHGT-001B Manual Del Usuario

STEP 2: ATTACH EX-ARM-REST STEMS TO THE TILLER

1. The ex-arm-rest stems on outside of the Transmission cover and align the lower boles.
2. Insert one 3/8"-16x 1" bolt for each side in lower holes.
3. Start 3/8"-16 nuts on each bolt.
4. Insert one 3/8"-16x 1" bolt for each side in Upper holes at desired handlebar height.
5. Tighten all the nuts.

STEP 3: ATTACH HANDLE BAR TO THE TILLER

1. Insert four fastness bolts for each side in every holes.
2. Start fastness nuts on each bolt.
3. Tighten all the nuts.
74