Honeywell Home THP2400A1027 Instrucciones De Instalación página 4

THP2400A1027 COVER PLATE ASSEMBLY
Mount Cover Plate to a Horizontal 2 in. X 4 in. Electrical Box (See Fig. 4)
1. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the electrical box with the arrows pointing up.
2. Insert two #6-32 X 5/8 flat head screws. Check leveling, if desired, and tighten the flat head screws.
Fig. 4. Mount cover plate, wall plate and thermostat to a horizontal 2 in. X 4 in. electrical box.
Resideo Inc., 1985 Douglas Drive North,
Golden Valley, MN 55422
www.resideo.com 69-2759EFS—03 M.S. Rev. 12-19 | Printed in United States
This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502
©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.
ELECTRICAL BOX
WIRE
COVER PLATE
WIRE HOLE
MOUNTING HOLES (2)
WALL PLATE
WIRE HOLE
MOUNTING HOLES (2)
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
THERMOSTAT
M34265