Blower Unit Proflow2 Sc 160 Asbestos - Scott Safety Proflow2 SC160 asb Instrucciones Para El Uso

Blower unit Proflow2 SC 160 asbestos

5064580 Proflow2 SC 160 asb, hose 80 cm angle (power battery+PVC belt)
5064590 Proflow2 SC 160 asb, hose 100 cm (power battery+PVC belt)
The blower unit Proflow has been designed to conform with EN 12941/EN 12942.
EC certified by BSI (0086), Kitemark Court, davy Ave, Knowlhill, Milton Keynes, MK5 8PP, England.
1. General
o
Proflow is a respirator system designed to supply filtered air for use in dangerous environments.
o
The device consists of a waist-mounted battery-driven blower and two filters.
o
Air is drawn through the filters by an electronically-controlled fan and led through the breathing hose
into the facepiece.
o
Model SC: The operation data can be read at a service center by a computer programme.
2. Limitations of use
2.1 This product must only be used by trained persons fully aware of workplace hazards.
2.2 The filtering device must not be used if the environment and contamination is unknown. In case of
doubt, isolating respirators (air supply) which function independently of the atmosphere must be
used.
2.3 The filtering device must not be used in confined spaces (e.g. cisterns, tanks) because of the risk of
oxygen deficiency or presence of heavy oxygen-displacing gases (e.g. carbon dioxide).
2.4 The filtering device may be used only if the oxygen content of the air is 18–23 vol.%.
2.5 Gas filters do not protect against particles. Similarly, particle filters do not provide protection against
gases or vapours. In case of doubt, use combined filters.
2.6 Normal filtering devices do not protect against certain gases such as CO (carbon monoxide), CO
(carbon dioxide) and N
2.7 Particle filters are only allowed for single use if they are applied against radioactive agents or micro-
organisms (virus, bacteria, fungi and spores).
It is likely that adequate protection cannot be guaranteed if the user's beard, hair, spectacle frames
2.8
or clothing intrude into the face seal.
2.9 When a breathing protector is used in potentially explosive atmospheres, please follow the
instructions given for such areas.
2.0 The blower must be running while using the respirator. If the blower turns off by accident, the
device ceases to function as a respirator, and carbon dioxide levels may instantly rise. This is
considered an exceptional situation
2.11 At a very intense working pace, the pressure in the facepiece can change into negative pressure at
peak inhalation.
2.12 Protection levels may be reduced if wind speed exceeds 2 m/s.
2.13 Recommended operation conditions -10...+40 C, relative humidity (RH) under 95 %.
2.14 Filters must not be fitted directly to the the face shield or breathing hose.
2.15 Working with open fire or molten metal splashes poses a risk of ignition for filters containing
activated carbon (gas filters and combined filters), whereby hazardous toxic concentrations can
rapidly build up.
(nitrogen).
2
13
2