lidl HG05686A-US-TX Manual De Instrucciones página 21

Connecting the temperature station with the outdoor
sensor and the WWVB radio signal:
After inserting the batteries, the temperature station will attempt to
connect to the outdoor sensor. This process can take a few minutes.
The radio signal symbol flashes. Once the temperature sta-
7
tion has successfully connected to the outdoor sensor, the radio
signal symbol stops flashing and the temperature is shown in
7
the LC display.
Note: If the temperature station does not receive the signal from
the outdoor sensor within 3 minutes, the temperature station auto-
matically starts with the reception of the radio time signal. After
successful reception of the outdoor sensor signal or after 3 minutes,
the temperature station starts with the reception of the radio time
signal. This process can take up to 5 minutes and is indicated in the
LC display by the flashing WWVB symbol .
11
After successful reception of the WWVB radio signal, the WWVB
symbol is displayed continuously in the LC display.
11
Note: Do not move the temperature station while it is receiving the
signal. This could otherwise interfere with reception. If synchronization
US-EN 23
317485_1904_aur_Funk-Temperaturstation_content_US.indd 23 27.09.19 14:02