fails during initial set up, try changing the location (e.g. place the
temperature station near a window).
Reception may be considerably reduced by obstructions (e.g. con-
crete walls) or sources of interference (e.g. other electrical devices).
If the reception of the radio signal continues to be interrupted, you
can turn on/off the automatic radio time receive function manually.
Press and hold down the – button
WWVB symbol
radio time receive function is turned off. Now you can set the
time and date manually (see "Setting the time format / zone /
date / time / language / temperature unit manually").
Press and hold down the – button
When the WWVB symbol
dio time receive function is turned on. The temperature station
will start receiving the radio time in the early morning.
24 US-EN
317485_1904_aur_Funk-Temperaturstation_content_US.indd 24
for about 3 seconds. If the
17
is shown in the LC display, the automatic
11
for about 3 seconds again.
17
disappears, the automatic ra-
11
27.09.19 14:02