Temperature Station - lidl HG05686A-US-TX Manual De Instrucciones

Wall-mounting the temperature station and / or the
outdoor sensor:
Note: This step requires an electric drill and a crosshead
screwdriver.
PROPERTY DAMAGE! Carefully read the instructions for use
and safety notes for your drill.
not hit electrical, gas or water lines when drilling into the wall. If
necessary, check the wall with a wall scanner before drilling.
317485_1904_aur_Funk-Temperaturstation_content_US.indd 25
DANGER TO LIFE, RISK OF INJURY AND
DANGER TO LIFE! Be careful that you do

Temperature station

Mark the location of the hole (D 0.24 in (D 6 mm)) on the wall.
Note: Use the included drilling template intended for marking
the drill holes.
Drill the hole with an electric drill.
Push the wall anchor
Using a crosshead screwdriver, screw the screw
wall anchor.
into the drilled hole.
35
into the
36
US-EN 25
27.09.19 14:02