Setting The Signal Type - lidl HG00783A-TX Manual De Instrucciones

neighborhood, the transmitter and the receiver have to be synchronized
via encryption. Every transmitter functions with a different signal en-
cryption.
Synchronize the transmitter and receiver as follows:
The receiver can indicate the reception of a door signal either both
optically and acoustically, or only acoustically, or only optically.
320257_silv_Design-Funktuerklingel_content_US.indd 17
As soon as the batteries are installed, the receiver enters synchro-
nizing mode for 1 minute. During synchronizing mode, the signal
indicator steadily lights up blue.
1
You can also manually enter synchronizing mode by holding the
synchronizing button
The signal indicator
1 minute, to indicate that the receiver is in synchronizing mode.
Press the chime button
in synchronize mode. If the receiver receives the signal, the steady
blue light of the signal indicator
that the synchronization is successful.

Setting the signal type

Using the signal type selector button
is to be indicated both optically and acoustically or acoustically
or optically.
Press the signal type selector button
will sound and afterward the signal indicator
ceiver will now indicate the door signal acoustically and optically.
for 3 seconds.
5
on the receiver will steadily light up for
1
of the transmitter, while the receiver is
9
flickers 6 times to indicate
1
, select whether the signal
3
once. An acoustic signal
3
will flash. The re-
1
US-EN 17
01.03.19 12:13