Motorola VAC-6058 Guia Del Usuario página 7

Charging Procedures
1. Place the Multi-Unit charger on a flat surface.
2. Firmly insert the power supply into the charger DC Inlet Socket at the back of the
charger.
3. Plug the power supply power cord into a matching power outlet.
4. Insert the radio with battery or stand-alone battery into an available pocket.
Note: Turn off the radio when charging battery with radio attached.
Align the slot
with the guide
5. When the radio or stand-alone battery is properly seated in the pocket, the LED
of the Multi-Unit Charger will be Steady Red.
6. The radio or stand-alone battery is ready for use when the Charging status is
Steady Green.
Note: Grip the radio body when inserting, or removing the radio form the charger.
Avoid pulling the radio antenna when removing the radio.
5