LED Indications
Charger Powers ON
Battery is inserted correctly.
Rapid Charging
Fault
(Connected to invalid, damaged, or over-charged batteries)
Charging Complete
Charging nearing Completion
Standby, battery is waiting to rapid charge
• Battery voltage is too low, or battery is too hot or too cold. Battery
will automatically begin charging once condition is corrected.
• New battery or Ultra-High Capacity battery. The LED may go into
flashing Red after several minutes. Remove and reinsert battery
to get another recovery period. This procedure may requires
several repeats.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are
the property of their respective owners.
© 2017 and 2020 Motorola Solutions, Inc. All rights reserved.
Table 3: LED Indications
Status
6
LED Indicator
Flash Green once
No indication
Steady Red
Flashing Red
Steady Green
Flashing Green
Flashing Amber