Kohler K-13460 Guia Del Usuario página 4

Temperature Lever
Temperature
Lever
Spring Washer
Disassemble/Reassemble Faucet
NOTE: Cover the drain with the plastic cap (provided) or towel to
avoid losing small parts during this procedure.
Disassemble
Using the hex wrench provided, remove and retain the screw
from the temperature lever.
Remove and retain the temperature lever with the spring washer.
Remove and retain the screw from the back of the faucet.
Slide the spout off the body.
Reassemble
Slide the spout over the body until the base of the spout is flush
against the mounting surface.
Reinstall the screw into the back of the faucet.
Reinsert the temperature lever with spring washer into the faucet.
Reinstall the screw to secure the temperature lever to the faucet.
1102759-5-C
Back of Faucet
Screw
4
Screw
Body
Kohler Co.