Fiberglass Souv Installation - Glaziar Predator SO2000UV Manual De Uso

FIBERGLASS DUCTWORK INSTALLATION
1-Locate suitable area of duct
for installation
3- Cut hole in duct using 3,5" hole saw.
ALTERNATIVE CUTTING METHOD
1. Using template, mark
4 holes on duct.
www.glaziar.com / info@glaziar.com
6 feed max
3. Cut between holes using a utility
knife. Continue with #4 (above)
2-Mark location for 3.5" opening using either the
mounting plate or included template. Also mark
the locations of 4 screw holes in corners
(see template).
4- Drill 4 holes (at corner screw locations)
using a 3/8" drill bit.
2. Draw a line between each corner mark
30