Bosch GBH Professional 5-38 D Manual Original página 17

OBJ_BUCH-273-002.book Page 17 Tuesday, June 22, 2010 11:24 AM
Technical Data
Rotary Hammer
Article number
Rated power input
Rated speed
Impact rate
Impact energy per stroke according to EPTA-Procedure
05/2009
Chisel positions
Chiselling capacity in concrete of medium hardness
Tool holder
Lubrication
Max. drilling dia.
– Concrete (with twist drill)
– Concrete (with break-through drill bit)
– Brickwork (with core bit)
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 22.06.2010
Bosch Power Tools
GBH 5-38 D Professional
GBH 500 Professional
W
-1
min
-1
min
J
kg/h
mm
mm
mm
kg
Assembly
Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle
Operate your machine only with the auxilia-
ry handle 5.
The auxiliary handle 5 can be set to any position
for a secure and low-fatigue working posture.
– Turn the bottom part of the auxiliary handle
5 in counterclockwise direction and swivel
the auxiliary handle 5 to the desired position.
Then retighten the bottom part of the auxilia-
ry handle 5 by turning in clockwise direction.
1 609 929 V37 | (22/6/10)
English | 17
0 611 240 0..
1050
320
2900
5.9
12
110
SDS-max
Oil lubrication
38
55
90
5.8
/II