Troubleshooting (continued)
4
The handle is closed or the
batteries are not working
□
Water does not come out of the spray head.
□
If the handle is closed, open the handle and
move your hand in the sensor area to test that
the sensor ashes 10 times continuously and
slowly. If this occurs, you need to replace the
batteries in the sensor.
Flash 10 times
continuously
and slowly
1
Replace the batteries
14
5
The washer is dirty or
damaged
□
There is a low water- ow pattern.
□
This indicates that the washer in the "in" end of
the control box is dirty or damaged. Remove the
hose and unscrew the connector. Take out the
washer from the control box. Clear the washer
or replace the washer. Reassemble the connector
and hose.
Hose
Connector
Washer
Control box