Festo CPX-E-EP Manual De Instrucciones página 26

Parametrización
N.º de atributo Acceso
2 Get
3 Get
4 Get
5 Get
26
Descripción
Bit 1: Halfduplex/Fullduplex
0 = Halfduplex
1 = Fullduplex
Bit 2 4: Negotiation status
...
0 = Autonegotiation in progress
1 = Autonegotiation and speed detection failed
2 = Autonegotiation failed but detected speed
3 = Successfully negotiated speed and duplex
4 = Autonegotiation not attempted
Bit 5: Manual setting requires reset
0 = No local hardware fault
1 = Local hardware fault detected
Bit 6: Local hardware fault
Physical address (MAC layer address)
Interface counters
– In octets
– In Ucast packets
– In NUcast packets
– In discards
– In errors
– In unknown protos
– Out octets
– Out Ucast packets
– Out NUcast packets
– Out discards
– Out errors
Media counters
– Alignment errors
– FCS errors
– Single collisions
– Multiple collisions
– SQE test errors
– Deferred transmissions
– Late collisions
– Excessive collisions
– MAC transmit errors
– Carrier sense errors
– Frame too long
Tipo
DWORD
ARRAY of
UINT[6]
STRUCT of
UDINT
STRUCT of
UDINT
Festo — CPX-E-EP — 2020-01a