Descargar Imprimir esta página

DeVilbiss CAMAIR 130526 Instrucciones De Servicio página 2

Ocultar thumbs Ver también para CAMAIR 130526:

Publicidad

Idiomas disponibles

Idiomas disponibles

Page 2
SI-6-18-12-
INST LL TION
RISK OF PERSON L INJURY
RISK OF PROPERTY D M GE
Except as otherwise specified by the
manufacturer, this product is specifically
designed for com pressed air service and
use with any other fluid (liquid or gas) is
a misapplication. For example, use with
or injection of certain hazardous gases in
the system (such as oxygen or liquid
petroleum gas) could be harmful to the
unit or result in a combustible condition
that may cause fire or explosion.
Manufacturer's war ranties are void in the
event of misapplication and manufac-
turer assumes no responsibility for any
resulting loss.
1. Install as shown on page one.
2. For an inexpensive wall bracket,
purchase the following parts at your
local hardware store:
Split Ring Hanger, 3/4"
B Threaded Rod
C Ceiling Flange
(See Figure 1 below)
FIGURE 1
B
C
M INTEN NCE, FILTERS
(SEE P GE 3)
RISK OF PERSON L INJURY
Components are under pressure. Relieve
air pressure before performing any
maintenance.
1ST ST GE W TER SEP R TOR FILTER
1. Daily, twist drain to remove liquid.
2. Every 3 months, replace element.
2ND ST GE CO LESCING FILTER
1. Daily, twist drain to remove liquid.
2. Daily, check replacement indicator
(with air flowing.)
OK
REPL CE
ELEMENT
3RD ST GE DSORBER FILTER
1. Daily, twist drain to remove liquid.
2. Replace charcoal element every six
weeks (or sooner if odors are
present.)
M INTEN NCE, REGUL TOR
(SEE P GE 3)
RISK OF PERSON L INJURY
Components are under pressure. Relieve
air pressure before performing any
maintenance. Rotate regulator knob
fully counter-clockwise to relieve regu-
lator spring pressure.

Publicidad

loading

Productos relacionados para DeVilbiss CAMAIR 130526