Motor Brushes - DeWalt DW931 Manual De Instrucciones

391742/DW931,932 1/22/01 9:10 AM Page 15
joint. T-joints are most commonly used when attaching shelves to
the sides of a bookcase. The method described below will work if
your shelf material is at least 5/8" thick.
A. Place the workpieces on a work surface exactly as you will be
assembling them in the form of an upside down "T." Mark lightly
along the joint where the top of the shelf is to end up (see Figure
31). Mark biscuit locations at the joint interface on the shelf piece
only.
B. Lay the shelf down on the mating workpiece. Clamp the two
workpieces together and to the work surface in this position (see
Figure 32).
C. Set up the tool by selecting the proper biscuit size and setting the
adjustable fence angle at 0°.
D. Using the bottom registration surface (shoe), align the tool with the
biscuit location marks and make a vertical and a horizontal plunge
cut for each biscuit location as shown in Figure 33.
E. Glue, assemble and clamp the joint.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center. If you need
assistance in locating any accessory for your tool, please contact your
local dealer or authorized service center.
CAUTION: The use of any other accessory not recommended for
use with this tool could be hazardous.

Motor Brushes

D WALT uses an advanced brush system which automatically stops
E
the tool when the brushes wear out. This prevents serious damage to
the motor.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D Walt heavy duty industrial tools are warranted for one year from date
E
of purchase. We will repair, without charge, any defects due to faulty
materials or workmanship. For warranty repair information, call 1-800-
4-D WALT. This warranty does not apply to accessories or damage
E
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provices.
In addition to the warranty, D
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
15
WALT tools are covered by our: