Steren BAF-510 Manual De Instrucciones página 23

2. CONTROLS
1. XLR and 6.3 mm channels 1 and 2 mono inputs
The XLR is balanced, designed to accept microphone signals. The XLR input will be disabled
when other equipment is connected to the inputs of 6.3 mm.
2. 6.3 mm stereo / mono channel 3 inputs
Left and right 1/4 line inputs are used to connect computers with audio in stereo or Mono
signals if you insert the computer into the left connector.
3. Stereo RCA inputs
Stereo RCA inputs can be used to connect CD players, cassette, and other online output
audio equipment.
4. Auxiliary RCA outputs
Left and right RCA outputs provide a line out to a recorder of cassettes, home audio
equipment, or computer audio recorder.
5. Reverb control
This slider adjusts the level of effect sent to the speaker for each channel.
6. Treble control
Move the control to the right to increase the output of high frequencies. Move to the left to cut
these frequencies, reducing the annoying whistles. The control has levels of - 10 to + 10dB.
7. Bass control
The bass control allows you to adjust output frequencies to add more warmth to the voice
as well as increase the bass output in guitars, drums and synthesizers, only by moving the
control clockwise. Move the control to the left to reduce the noise of retumbe or hum.
8. Gain
Lets you adjust the volume level of the selected channel.
6 6