Publicidad
Idiomas disponibles
Idiomas disponibles
18"
(45.7 cm)
1-11/16"
(4.3 cm)
8-11/16"
(22.1 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Integral apron with heater, left drain
Integral apron with heater, right drain
Fixture*:
Bathing well:
Basin area, bottom
48" (121.9 cm) x 24" (61 cm)
Basin area, top
59" (149.9 cm) x 30" (76.2 cm)
Weight
110 lbs (49.9 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
67 gal (254 L)
* Approximate measurements for comparison only.
V
Pump: 1-speed
120
Heater: 1.5 kW
120
Required Electrical Service
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump and heater.
1038377-1-B
66" (167.6 cm)
1" (2.5 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1224-HL
K-1224-HR
Hz
A
60
12.5
60
12.5
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
36"
(91.4 cm)
20"
(50.8 cm)
1-1/2" OD
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
42 lbs/square foot (205 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" R.
(1.3 cm) Max
Integral
Flange Detail
Kohler Co.
Publicidad
