Foster 7353000 Manual De Instrucciones página 20

Turning the cooking
zones off
Turning the cooker hob
off
Safety lock / child safety
device
Residual heat indicator
Engaging/disengaging
the dual circuit
Pressing and holding sensors »+« (C) or »-« (E) automatically decreases or
increases the heat settings. This can also be done by touching the corresponding
sensors individually and modifying the heat setting by a single level each time.
The settings can be adjusted only for the selected cooking zone. The display will
visualise the symbol »0«, or „H" if the cooking zone was previously heated (see
paragraph relative to residual heat).
Turning off the cooking zone before cooking is completed allows for saving
energy by using the residual heat to complete cooking.
• The selected cooking zone must be activated.
• Press the on/off sensor »-« (E) to lower the heat setting to »0« and after 10
seconds, the cooking zone will turn off.
Deactivation
• The selected cooking zone must be activated.
• The cooking zone turns off by simultaneously pressing sensors (+) and
(-) (C and E respectively).
The cooker hob can be turned off at any time through the on/off sensor (A).
Activating this safety lock prevents use of the hob or cooking zones. The safety lock also
functions as a child safety device.
Activation
• Turn off all the cooking zones (heat setting ="0").
• Press sensor (A) to turn on the cooker hob (if turned off). The »0« symbol lights up on
all the displays.
• Simultaneously press sensors (C+E, +/-). After the buzzer sounds, press sensor »C«
again. All the displays will visualise the symbol »L«, which disappears after 20 seconds.
The safety lock/child safety device is activated.
Deactivation
• Press sensor (A) to deactivate the safety lock. All the displays will visualise the symbol
"L".
• Simultaneously press sensors (C+E, +/-). After the buzzer sounds, press sensor »E«
again. The safety lock/child safety device is deactivated.
The glass-ceramic hob is equipped with a residual heat indicator
"H". Once the cooking zone is turned off, the symbol "H" lights up on the display to
indicate the presence of residual heat, which can be used for warming or thawing
foodstuffs.
Once the "H" symbol disappears, the cooking zone will not have cooled down
completely.
Beware, risk of burns!
• After activating a certain cooking zone (C) (the heat setting must be above zero), the
dual circuit is automatically engaged.
• The external circuit - if disengaged - relevant to an activated cooking zone (the heat
setting must be above zero) can be engaged by pressing the dual circuit button (F). A
dot (G) adjacent to the relevant cooking zone appears once the dual circuit is engaged.
• Pressing the dual circuit button (F) re-engages the external circuit. This can be done at
any time.
20