Taurus TAS-2250 Manual Del Usuario página 15

mode it was in when it stopped.
-The operating mode selected in the
first place will not change even if the
room temperature changes.
-If the operating mode does not match
the desired room temperature, press the
mode button to select the right mode.
Manual operation cooling,
dehumidifying, fan and heating
-Press the On/Off button.
-Press the mode button to select the
operating mode. Every time you press
this button, the operating mode will
change successively in the following
sequence: automatic - cooling -
dehumidifying - fan - heating.
-To stop it, press the On/Off button.
Once the operating mode has been set,
the appliance will start working in the
mode it was left in last time the On/Off
button was pressed.
-If you want to change the temperature
you have selected, press the "
" " buttons.
Notes on dehumidifying mode:
-The temperature cannot be selected in
this mode.
-This mode slightly reduces the ambient
room temperature.
Warning
-When the ambient temperature is very
high, the room temperature might not
reach the selected temperature, even
though the unit is operating at full
performance.
-This may be due to the fact that the
temperature requested is beyond what
the appliance can provide.
Setting the air speed "
-Press the fan speed control button to
change the air speed.
-Every time you press this button, the
fan speed will change successively in
the following sequence: low, medium,
high, automatic.
-To cool the room, select high mode.
If the noise of the appliance annoys
you, select sleep mode.
Setting the air direction "
-To change the direction of the air, press
the air direction button. When you press
this button, the order will appear on the
remote control screen and the horizontal
slat will move automatically.
-If you press the button again, the
horizontal slat will stop and the order
will disappear from the screen.
Warning
-Set the vertical air direction using the
" or remote control. If you move the
horizontal slat manually, you could
damage the appliance.
Automatic air direction control
-To change the horizontal air direction,
move the vertical slats manually.
-Set the slats before switching the
appliance on.
Operation in sleep mode "
-Select this mode to reduce the noise
of the appliance while you sleep.
-Press the sleep button. To turn off silent
mode, press the sleep button again.
-sleep mode reduces the noise given
off by the indoor unit, allowing it to
make less noise than in normal mode.
- In sleep mode, it cannot act as if it
was in an automatic operating mode..
"
"
"