Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
ENGLISH
Do not force the cutting blade into the
u
workpiece. Note that cutting sheet metal will
normally take more time than sawing thicker
wooden workpieces.
When cutting metal spread a thin film of oil
u
along the cutting line before cutting.
When sanding new layers of paint before ap-
u
plying another layer, use extra fine grit.
On very uneven surfaces, or when removing
u
layers of paint, start with a coarse grit. On
other surfaces, start with a medium grit. In
both cases, gradually change to a fine grit for a
smooth finish.
Consult your retailer for more information on
u
available accessories.

Technical data

No-load speed
min
Oscillating angle
Degrees
Weight
kg
10
(Original instructions)
MTOS4
MTOS4
(14.4 V)
(Max) (H1)
(H1)
-1
16300
18500
2.8
2.8
1.3
1.3
Level of sound pressure according to EN 60745:
Sound pressure (L
) 86.5 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 97.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Cutting wood (a
) 6.2 m/s
h, CW
2
Cutting metal (a
) 9.8 m/s
, uncertainty (K) 1.5 m/s
h, CM
2
Sanding (a
) 11.8 m/s
, uncertainty (K) 1.5 m/s
h,
Guarantee
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee. This
guarantee statement is in addition to and in no way
prejudices your statutory rights. The guarantee is
valid within the territories of the Member States of
the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
2
, uncertainty (K) 1.5 m/s
2
2

Publicidad

Tabla de contenido
loading

Tabla de contenido