Maintenance Instructions - stayer HP750BE Manual De Instrucciones

gb

6_MAINTENANCE INSTRUCTIONS

CLEANING, MAINTAINING, LUBRICATING,
SHARPENING
Before any work on the machina itself, pull the mains
plug.
For safe and proper working, always keep the machina
and ventilation slots clean.
In extreme working conditions, conductiva dust
can accumulate in the interior of the machina
when working with metal. The protective insulation
of the machi ne can be degradad. The use of a
stationary extraction system is recommended in
such cases as well as frequently blowing out the
ventilation slots and installing a residual current
device (RCD).
Conservare e trattare con cura l'accessorio.
Please store and handle the accessory(-ies) carefully.
lf the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for
STAYER power tools.
REPAIR SERVICE
The technical service will provide you advice regarding
questions you may have on the repair and maintenance
of your product as well as on spare parts. You may
also obtain exploded views and information on spare
parts on the internet under: info@grupostayer.com
Our team of technical advisors will be glad to guide
you regarding acquisition, application and adjustment
of products and accessories.
GUARANTEE
Guarantee card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You
should fill out the card completely and return to vendar
with a copy of purchasing receipt or invoice and you
should receive a receipt.
Note: lf you cannot find the warranty card within
the documentation, you must ask for it through
your supplier.
The warranty is limited only to manufacturing
defects and expire if pieces have been removed or
manipulated or repaired other than the manufacturar.
7_LEGAL REGULATIONS
TECHNICAL FEATURES
The values given are val id for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V~ 60Hz. For lower
voltage and models for specific countries, these
values can vary. Please observe the article number on
the type plate of your machi ne. The trade names of
the individual machines may vary.
We reserve the right to change related to technical
advance.
= Power in watts
W
= Rated voltage
v
= Rotation speed
rpm
Dmax = Disc diameter
= Flexible hose
= Mass
= Noise
L = Acoustic power level
WA
L = Sound pressure level
pA
= Vibration
- 12 -