3D soleplate
The unique round shape of the 3D soleplate
ensures best gliding results on diffi cult parts (e. g.
buttons, pockets etc.)
(D) Auto-off
This function is activated if after 10 minutes there
has been no steam emission.
• When the appliance is in the auto-off mode the
temperature control LED (1) is fl ashing in a faster
interval.
• To turn the iron on again press the reset button
(14), the mode button (12) or the steam button (2).
• Before start ironing again wait until the
temperature control LED is permanently on.
(E) Lock system / storage
The appliance is equipped with a lock system for
convenient transportation and easy storage. It
is possible to lift and carry the appliance on the
handle of the locked iron.
NOTE: Before transportation make sure the iron is
properly locked and has cooled down completely. In
case you do not use the appliance for a longer time
(more than 1 month), empty the water tank before
storage.
• Place the iron on its heel rest (3) into the iron rest
(4) on the base unit.
• To lock the iron turn the locking knob (15) to
• To unlock the iron turn the locking knob to
The iron will be released.
Unplug and let the appliance cool down (the
soleplate is hot) before winding the cords for
storage.
(F) Anti-limescale fi lter cartridge
replacement
To maintain optimum performance of your
appliance it is important to exchange regularly the
anti-limescale fi lter cartridge or use demineralised
water.
When the anti-limescale fi lter cartridge requires
changing, the anti-limescale indicator (13) turns on.
a. Unplug the appliance.
b. Remove the old anti-limescale fi lter cartridge (7)
by lifting it out of the water tank (8) and dispose it.
c. Follow the instructions given on the foil and
insert the new anti-limescale fi lter cartridge into
position until it locks into place.
d. Close the tank lid, plug in and press the reset
button (14) for 5 seconds until the LED turns off .
14
NOTE: After the replacement of the anti-limescale
fi lter cartridge press the steam button (2) for about
60 seconds and hold the iron horizontally to pull the
steam through to the soleplate.
In case of using demineralised water, you need to
leave the fi lter cartridge in the compartment and
press the reset button (14) for 5 seconds each time
the anti-limescale indicator turns permanently on
until the LED turns off .
We recommend using the CareStyle anti-limescale
fi lter cartridge (can be purchased in stores, through
www.braunhousehold.com or by calling Customer
Service).
Do not use any chemicals, additives or descaler to
rinse the water tank.
(G) Care and cleaning
• Before cleaning, always make sure that the
appliance is unplugged and has cooled down
completely.
• To clean the soleplate it is suggested to use a
damp cloth.
• Never use chemicals, vinegar or scouring pads
(eg. sponges with coarse nylon fabrics etc).
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
.
provided in your country.
.
For UK Only
Guarantee Information
All Braun Household products carry a minimum
guarantee period of two years. The rights and
benefi ts under this guarantee are additional to your
statutory rights which are not aff ected.
Please keep your receipt as this will form the
basis of your guarantee.
In the unlikely event of a breakdown you have access
to professional help from our team simply by calling:
02392 392333
For service in the Republic of Ireland please call:
012475471
Braun Household undertakes within the specifi ed
period to repair or replace any part of the appliance,
free of charge (with the exception of any glass or
porcelain-ware incorporated in the product) found
to be defective provided that;